Відео

It is working fine till today without any issue that nothing I can say about it. Stiffness is good too so it simply gets the job done.

Thanks! Maybe we can enjoy your long/mid term review as well

@@thomasschragen4446 I am planning one once life issues are out of the way.

@@TaichoCyclistany reason you decided not to use their chain rings? Also what brand chain rings did you opted to use with the crankset ?

@@walkedintoawall4893 simply because I have spare chainrings laying around at home so I decided against spending additional for things I already have. The ones at home are from a China brand called "STONE" 50/34 in anondised color of choice. They shift fine so far and fairly easy to find on Aliexpress.

@@zero85ZEN Yes I did. Not any significant impact to the shifting accuracy. Works just as intended.

There is a hum to the rollers which is present but not overly loud. My family watches the television beside my training area as they have gotten used to the sound.

I’m guessing the firmware update changed things. Who knows. 🤷🏻‍♂️🤦🏻‍♂️

E-shifting on the Rider320 is not aupported. Its documented on Bryton website. www.brytonsport.com/#/R320

Yup. You need to specify the gear sizes on the Bryton which is visually self-explanatory. Believe me, I did it all with reading any instructions on the 420. Guess it is that easy to set up.

Thanks! Looks like the Bryton is the way to go with Wheeltop EDS! 👍🏻

Wheel Top official site listed North America and Canada as their delivery countries. wheeltop.com/pages/shipping-delivery You can check with them to confirm your location.

I would not be able to answer confidently for Garmin as my unit is a Bryton. However if your Garmin is capable of displaying gears, not harm trying to detect and link up with your EDS TX.

My pleasure. Just glad to find that my humble video can be of help.

I have the same frameset. Just leave it open.

Magene P505 is compatible with crankarms of the following patterns: 1) 505-S1108 / S1078: Sram 8-bolt crank arm (with Sram Red AXS, Force AXS, Red 22, and Quarq, etc.) 2) P505-S1103: Sram 3-bolt crank arm (with SRAM Force 22, Rival 22, S-900 etc.) 3) P505-R110X: Rotor Aldhu, Vegast etc. 45-tooth crank arm. The Lexon R1 uses the Easton Cinch pattern. So it is not compatible with P505 at present. Xcadey X-Power S is compatible because I have the powermeter.

25C

Make it happen. :)

How easy it is for you to set up is entirely up to your confidence level to manage the app to setup, connect, calibrate the gears. On top of that if your bike needs help to be built up, then a local bike store to do that and help you with the EDS TX set up is prefererred then.

Thanks for your prompt response. I’m totally new to road bike and hope you are able to extend your help. Any recommendation on the bike shop you know who is experience on wheeltop set up. Thanks.

Download from MyWhoosh website. Thank you.

@@TaichoCyclist how?

@@dimossevastiadis5082 download here www.mywhoosh.com/getting-started-mywhoosh-cycling-app/ and follow the instruction for Windows (PC).

7.45 kg in small.

You cannot go wrong with the EliteWheel DRIVE. Great value for performance unless you are looking for racing specifc ones.

@@TaichoCyclist thank you. Did you use it for daily?or training

Most of the rides

Thank you

Only on Taobao for this brand called STONE.

So far the crankset user isn't long to get a review yet. Give it a while more. A few quick notes: • The stiffness is there. • Helps the bike get a weight diet 🥳 • The lockring on non-drive side came loose and is re-tighten; else there will be spindle play in bottom bracket 😑 • Inconsistent spider lockring versions as I got the 16-tooth external groove version which is impossible to tighten on powermeter. Latter version reportedly supplied with the CINCH 20-tooth internal splined lockring. 🤞🏻

​@@TaichoCyclist Is that 15 nm correct recommendation of the manufacturer recommendation it to tighten? Many GXP including Riro/Raceworks one, often recommends towards upper 30 nm 🤔

@@penzuugi we followed the recommended and so far held up fine. The last thing we want is having over-tightened parts and damaging it. Fingers crossed.

wheeltop.com/ ?

Aliexpress. Just search for it.

Similar but not identical. The shape generally is closely similar but the LEXON has indent on the front face of the crankarms. The alloy spider is exactiy identical between both brands. Well of course the largest difference is the price.

You use the WheelTop app to connect and configure all the derailleurs and shifters before tuning the gears.

@@TaichoCyclist Ok”, after I get everything paired then is it ok to install on the bike, then fine tune gears?

ZITTO

About USD730 (carbon)

How are you liking the EDS?

It's great so far, bit tricky to set up, especially the front mech. I still can't get that set howvid like but not too bad as long as I don't cross chain. I had issues with the rear at the start but swapped the chain from KMC to Shimano Dura Ace and was perfect after that. Both new chains but smoother with Shimano, that surprised me. The brake cables that are included need a lot of tightening in the calipers, they slipped with my normal torque. The rear mech is really fast, I've also Ultegra Di2 and the EDS is easily as fast. The front is not so quick. I wouldn't hesitate to recommend the groupset, when they sort the app out and do a firmware update on the front it will be even better.

@@MrJwmurph I thought that EDS had a similar function to auto trim? yeah I am having a hard time deciding between the EDS, LTWOO eRX, or SRAM Rival. Choices choices choices.

It does but in big/ big there is still some rub on the front cage. I don't use that combination but I can't tune it out. It's a good groupset but I'd only go for it on a rim brake bike. 105 Di2 disk is heavily discounted at the moment and the cost is too close for the EDS to compete.

Rain aside, they grabbed in a secure manner and confidently in faster stop situation. Some squealnin rain with standard pads. Maybe an aftermarket or better performing pad might be quieter in the wet. Oh yes, they are the Shimano 26mm road pad styled.

They range from coarse-fine to fine. Pretty much acceptable for filter blend.

It is pretty good with my first unit. This is my second one going on the TIME.

No they don't sell EDS TX. Try Aliexpress or TaoBao.

The integration is dependent on the bicycle computer companies to collaborate with component companies. The EDS TX so far to my knowledge has no collaboration with any of the computer companies. In future, who knows so until then its not possible to integrate.

Battery is held in place by screws against the derailleurs. Technically swappable if they need to be replaced by ordering with WheelTop.

I like it.

Thank you very much. Hopefully you find something that you will like and enjoy cycling with.

Still on first charge since February but I always charge my electronic gears at beginning day of every month. Exception is when the month before saw heavy usage from many rides.

You can leave a message here. 💡

@@TaichoCyclist I wanna have a feel of the groupset if that's ok? I see you stay in Sg right?

@@zzgamingyt7228 Saturday State of Affairs Cafe @ LongHouse Upp Thomson 7am. Come have a feel of it.

I read somewhere it goes up to 40T.